Drehmo c-matic 사용 설명서 - 페이지 15
{카테고리_이름} Drehmo c-matic에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Drehmo c-matic 20 페이지. Usb-adaptor kit for actuators with integrated control unit
페이지 인쇄- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.2.2 Connection on i-matic display unit DiM - 22 (Bluetooth)
The following picture shows the position of the interface connector for the SER02 adaptor on
the DiM - 22 unit.
The position of the 4 pole pin connector is located in a horizontal position underneath
the mounted LCD panel on the electronic board edge. The expanded finger like
adapter outline protects against an unintended reverse polarity. The adaptor has to be
easily plugged in with a plug in depth of about 6mm.
DREHMO
Instruction manual for USB adaptor kit
page 15 of 20