Drehmo i-matic 사용 설명서 - 페이지 16
{카테고리_이름} Drehmo i-matic에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Drehmo i-matic 20 페이지. Electrical actuator with integral controls
Drehmo i-matic에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (18 페이지)
페이지 인쇄- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.3 SER03 adaptor
The SER03 adaptor enables the serial access by means of a 2x6 pole male pin connector
matching on a corresponding 2x6 pole female socket connector in 2,54mm pitch.
Reverse polarity protection is not given by the design. The detection of the correct
polarity is only possible by means of the matching labeling J8, J9, X6 which can be
found on the adaptor as well as on the base board print.
A mismatch of polarity may result in a defect of the adaptor and the base plate!
DREHMO
Instruction manual for USB adaptor kit
page 16 of 20