Electrolux U29251 EUFG2900 지침 책자 - 페이지 14

{카테고리_이름} Electrolux U29251 EUFG2900에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux U29251 EUFG2900 16 페이지. Electrolux freezer instruction manual
Electrolux U29251 EUFG2900에 대해서도 마찬가지입니다: 지침 책자 (44 페이지)

페이지 인쇄

Door Reversal

It is not possible to re-hang the door.

Connecting the water hose.

The water coupling is connected to a water

tap with an external 3/4 inch thread.

This work is to be carried out by a skilled

plumbing installation technician.

The refrigerator is to be connected with a

shut-off cock. There are different type-approved

taps and tap assemblies on the market.

The water hose must not be cracked, squeezed

or be in tight bends.

If you require a longer water hose than that supplied,

then a VDE-approved 150 38 85-02/0 supply hose

should be used.

Before the refrigerator is taken into use in its final

location, ensure that the water connection has been

correctly carried out, that there is no leakage at the

connection to the refrigerator water valve or to the

water tap, and that the four spacers are properly in

position, see the illustration.

We recommend that the refrigerator is placed on a

"run-off" mat intended for refrigerators and freezers,

which makes it easier to detect possible leakage.

This run-off mat is available from your dealer.

When the water system is started

for the first time.

The following should be carried out when the

refrigerator is correctly connected to the water

supply in the building:

Open the tap on the water connection and start up

the refrigerator. The ice machine starts automatically.

Filling with water will start when the temperature is

sufficiently low. Do not use ice produced during the

first day since there is risk of a slight taste.

Electrical cord

Do not remove the power cord by pulling on its

lead, particulary when the product is being

pulled out of its niche.

Damage to the cord may cause a short-circuit, fire

and/or electric shock.

In the event of damage to the appliance's main

cable, only an authorised service company

recommended by the manufacturer or a similarly

qualified person may adjust it in order to avoid

shock hazard for the user.

Electrolux 818 38 03-01/7