Comnet FVT 1031 기계 설치 지침 - 페이지 3
{카테고리_이름} Comnet FVT 1031에 대한 기계 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet FVT 1031 5 페이지. 10-bit digitally encoded video transmitter with bi-directional data
INSTALLATION INSTRUCTIONS
Communication Networks
3 Corporate Drive • Danbury, CT 06810 • USA
Tel: 203-796-5300 • Toll Free: 1-888-678-9427
www.comnet.net
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other
means of security. Access should be limited to service personnel who have been instructed about the reasons for the restrictions
to the location. Any and all precautions should be taken and controlled by the authority responsible for the location.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the equipment in an environment compatible with
the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
10-BIT DIGITALLY ENCODED VIDEO RECEIVER
BLACK WITH WHITE STRIPE
FVR1031
WITH BI-DIRECTIONAL DATA
MULTIMODE
OR SINGLE MODE
OPTICAL FIBER
BLACK
NOTE: Remove Electrical Connector for
Rack Mount Units
INS_FVTFVR1031_REVA
07/24/09
Page 3