Comnet FVT1021M1 설치 및 운영 매뉴얼

{카테고리_이름} Comnet FVT1021M1에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet FVT1021M1 5 페이지. 10-bit digital video with return data

INSTALLATION AND OPERATION MANUAL

FVT/FVR1021(M)(S)1

10-bIT dIGITAl VIdEo wITh RETuRN dATA

The FVT/FVR1021 series video transmitter/receiver and data transceiver

supports the simultaneous transmission of short-haul quality 10-bit digital

video and return data over one multimode or single mode optical fiber. This

module is universally compatible with major CCTV camera manufacturers and

supports RS232 and RS422 data interfaces as well as up-the-coax data.

bi-color (Red/Green) lEd indicators are provided for rapidly ascertaining

equipment operating status. These units are interchangeable between stand-

alone or card mount configurations. See Figure A on Page 5 for mounting

instructions.

Figures 4 through 6 on Page 3 illustrates the specific data connections for

RS232, RS422, Manchester and bi-Phase data transmission.

Figure 7 on Page 4 describes the lEd indicators for each light on the unit.

INS_FVT/FVR1021_REV–

02/05/10

PAGE 1