Electrolux 949 596 287 00 사용자 설명서 - 페이지 13

{카테고리_이름} Electrolux 949 596 287 00에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 949 596 287 00 20 페이지.

페이지 인쇄

6. CARE AND CLEANING

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special scraper for the glass.

• Use a special cleaner applicable for the

surface of the hob.

6.2 Cleaning of the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

7. TROUBLESHOOTING

7.1 What to do if...

Problem

You cannot activate or op-

erate the hob.

WARNING!

Refer to Safety chapters.

WARNING!

Refer to Safety chapters.

the dirt can cause damage to the hob.

Put the special scraper on the glass

surface at an acute angle and move

the blade on the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and some detergent. After

cleaning, rub the hob dry with a soft

cloth.

Possible cause

The hob is not connected

to an electrical supply or it

is connected incorrectly.

The fuse is released.

You touched 2 or more

sensor fields at the same

time.

STOP+GO function oper-

ates.

ENGLISH

Remedy

Check if the hob is correctly

connected to the electrical

supply. Refer to the con-

nection diagram.

Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

Touch only one sensor field.

Refer to "Daily use" chapter.