Atkinson Electronics GSCM-MINI-D 매뉴얼 - 페이지 14

{카테고리_이름} Atkinson Electronics GSCM-MINI-D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atkinson Electronics GSCM-MINI-D 16 페이지. Generator start control module
Atkinson Electronics GSCM-MINI-D에 대해서도 마찬가지입니다: 빠른 매뉴얼 (9 페이지)

페이지 인쇄

GSCM-mini-D Outback Inverter and Onan HDKAL 7.5Kw Diesel Generator Example

Using Remote Port Connection

The GSCM-mini-d accepts Outback's two wire (switched 12VDC) generator start/ run signal to a 3 or 4 wire start/stop signal

for several diesel generators. The Onan RV series diesel generators provide a remote control terminal that for easy

installation. The Onan generators use a positive reference (B+) for their control switch and remote terminal input. The

generators AC output is used as a run feedback signal to know when the generator has started and when it shutdown. When

the GSCM-mini-d receives a start/run command from the Outback inverter it energizes the K2 relay to heat the glow plugs.

After 10 seconds K2 de-energizes and K1 energizes to start the generator. The AC signal tells the GSCM-mini-d when to

disengage the starter and when the generator has stopped when shut it down. The generator's combination switch should be

left in the 'ON' position for the GSCM-mini-d to be able to auto start/stop the generator.

www.atkinsonelectronics.com

800.261.3602

Circuit Board Division

Revised 11/2020