Andisoon Measure T635 Series 사용자 설명서 - 페이지 7

{카테고리_이름} Andisoon Measure T635 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andisoon Measure T635 Series 10 페이지. Hydrogen refueling nozzle

Communication
module power
interface pin
definition
IV. Application Method
1、 Hold the handle of the hydrogen refueling nozzle with the right hand
and the outer sliding sheath of the nozzle with the left hand. Slide the
sheath to draw it back with left hand and confirm that the hydrogen
refueling nozzle is in a connectable state (at this moment, the
hydrogen refueling nozzle can maintain a connectable state by its own
structure, and the left hand does not need to exert a setback force
continuously);
2、 The head of the hydrogen refueling nozzle is concentric with the
hydrogen filler and inserted axially. Hold the hydrogen refueling nozzle
handle in the right hand and push it in with axial force. When it is
connected in place, the external sliding sheath of the nozzle head will
spring out automatically under the action of spring force, giving out a
clear sound of metal impact (showing the red ring). At this point, the
hydrogen refueling nozzle and the hydrogen filler have been reliably
connected;
3、 Press the gas-adding button on the operation panel of the hydrogen
dispenser to realize the hydrogen refueling;
4、 After the hydrogen filling, the hydrogen dispenser will automatically
stop filling gas; after the internal pressure relief of hydrogen refueling
nozzle, hold the external sheath of the nozzle head with the left hand
and hold the handle of the hydrogen refueling nozzle with the right
hand to slide the outer sheath backward axially with the left hand until
the hydrogen refueling nozzle is in a separable state (covering the red
color ring), and retreat axially with the left and right hands to take out
the hydrogen refueling nozzle.
1
① Inlet connector
② Sealing cone of inlet
connector
③Power interface of infrared
communication module
Pin 1: 5V power supply+
Pin 2: GND
Pin 3: A
Pin 4: B
5