ATL Product Berkshire 400 Plus 사용자 설명서 - 페이지 4
{카테고리_이름} ATL Product Berkshire 400 Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATL Product Berkshire 400 Plus 4 페이지.
페이지 인쇄PAUSE TIME ADJUSTMENT
The 'PAUSE' key may be confi gured via the keypad
to represent 1 of 4 time periods (1~4 sec.). In all
cases, press 'SET', 'PAUSE', followed by a numeric
key (1~4 to set the time required). Press 'SET' to
fi nish. Default = 1 sec.
TBR TIME ADJUSTMENT
Transfer break times may be adjusted from
100~600ms in increments of 100ms. In all cases
press 'SET', 'TRANSFER', followed by a numeric
key (1~6) then SET to fi nish. Default = 100ms.
PROGRAMMING PORT
The Berkshire 400 Plus has an unidentifi ed port,
alongside the other confi guration switches, at the
rear of the telephone. Programming of this port is
limited to technicians trained in its use.
Help
NO DIAL TONE
•
Check that the telephone plug is fully inserted in
the socket
•
If it is, try connecting the telephone into another
socket, if available. If dial tone is now heard, the
original socket is faulty.
•
Alternatively, try connecting another telephone
into your socket. If this telephone gives dial tone,
then your new telephone is probably faulty.
TRANSFER/RECALL KEY NOT WORKING
•
Change the recall selector switch setting (T/E).
If the transfer operation is now satisfactory, the
problem is resolved.
Compliance Notes
The Berkshire 400 Plus may be connected to the
following types of installation:
1.
Direct Exchange Lines (DEL)
2.
Compatible
Exchanges (PABX). Please contact the
supplier of your Berkshire 400 Plus to
confi rm compatibility with your PABX.
Whilst the Berkshire 400 Plus is compliant as an
extension to a compatible PABX system, it cannot be
guaranteed to operate under all possible conditions
of connection. Any case of diffi culty should be
referred in the fi rst instance to the supplier of your
telephone.
Private
Automatic
Guarantee
Your Berkshire 400 Plus telephone is designed and
manufactured to exacting quality standards. This
enables ATL Telecom Limited to offer a 10 year
guarantee from the date of purchase. This guarantee
protects against faulty material or workmanship,
applies to the UK only and is not transferable.
The terms and conditions under which the guarantee
will be valid are as set out below.
1.
Misuse or any modifi cation carried out to
the telephone, or operation other than in
accordance with the instructions supplied,
will invalidate the guarantee.
2.
Damage arising from incorrect installation,
accidental damage or consequential loss,
are not covered under the guarantee.
3.
In the event of a fault developing during
the period of the guarantee, the complete
telephone should be returned to your
supplier, adequately and safely packed,
together with proof of date of purchase.
4.
The liability of ATL Telecom Limited will
be limited to the cost of repair or complete
replacement
instrument,
company. In the event that the same item
is not available, a suitable alternative will be
offered.
5.
The terms of this guarantee do not affect
your statutory rights.
Manufacturer's Declaration
ATL Telecom Limited declares that this product
conforms with the essential requirements of the
'R&TTE directive 1999/5/EC'
Note: A copy of the Declaration of Conformity is
available upon request from ATL Telecom Limited.
ATL Telecom Limited,
Branch
Lakeside, Fountain Lane,
St Mellons,
Cardiff
CF3 0FB
Telephone: 0330 333 8250
Facsimile: 0330 333 8251
www.atltelecom.com
1/433/001/610
of
the
same
at
the
discretion
Issue 02
defective
of
the
April 2010