Dremel 800-49 작동/안전 지침 매뉴얼 - 페이지 18
{카테고리_이름} Dremel 800-49에 대한 작동/안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dremel 800-49 20 페이지.
페이지 인쇄
DM 2610945859 05-07
Mandrel No. 401 is used with the felt
polishing tip and wheels. Thread the tip on to
the screw carefully. The felt tip must thread
Mandrel No. 402 has a small screw at its tip,
and is used with emery cutting wheels and
sanding discs. Higher speeds, usually
The machine-screw threading on Mandrel
No. 424 threads into polishing point No. 427.
This and other threaded mandrels must be
7/10/07
8:43 AM
Page 18
down straight on the screw Mandrel, and be
turned all the way to the collar.
maximum, are best for most work, including
cutting steel. Which is shown here.
screwed firmly down to the collar before being
used.
-18-