Bosch GBM9-16 작동/안전 지침 매뉴얼 - 페이지 10

{카테고리_이름} Bosch GBM9-16에 대한 작동/안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch GBM9-16 37 페이지.

1619PA9714.qxp_GBM9-16 11/19/15 12:55 PM Page 10

VARIABLE SPEED CONTROLLED

TRIGGER SWITCH

Your tool is equipped with a variable speed trigger

switch. The tool can be turned ON or OFF by

squeezing or releasing the trigger. The speed

can be adjusted from the minimum to maximum

REVERSING SWITCH BUTTON

The reversing switch button is located above

the trigger switch and is used to reverse

rotation of the bit. For forward rotation, (with the

chuck pointed away from you and the power

cord side positioned down) move button to the

far left. For reverse rotation move the button to

the far right (Fig. 4).

to a complete stop. Shifting during rotation of

the chuck can cause damage to the tool.

Your tool is equipped with chuck key that can

CHUCK KEY AND KEY HOLDER

be conveniently located on the cord protector

where it is always handy and unlikely to get lost

or misplaced (Fig. 1).

Operating Instructions

Do not change direction of

rotation until the tool comes

nameplate RPM by the movement of the trigger

towards the handle, controlled by the pressure

applied to the trigger. Apply more pressure to

increase the speed and release pressure to

decrease speed (Fig. 1).

-10-

FIG. 4