Andonstar 246S 사용자 설명서 - 페이지 9

{카테고리_이름} Andonstar 246S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andonstar 246S 14 페이지.

Lens B&C：

Steps：In pic 6 it marked out which parts of the microscope are involved to each step.

①Install and fix the nosepiece set with Lens B&C to the bottom of the focusing tube.

②Place the translucent backdrop board to the loophole on the stage, and place slides on it.

③Remove the two USB spot lights.

④ Loose the arm locker, located the whole monitor part to a desire height, meanwhile adjust the

height of the mechanical stage, make sure the final object distance is within 7-8mm(lens B). The

shorter the object distance is, the bigger magnification is. Or if you want to zoom in even more,

revolve the nosepiece to lens C and make the object distance within 3-4mm. The shorter the object

Lens B: Focus range: 7mm-8mm，Magnification: 390-510x (with3 times

digital zoom）

Lens C: Focus range: 3mm-4mm，Magnification: 690-1020x (with3 times

digital zoom)

Applications: Microscope slides etc.

（Pic 6 go with Lens B&C）