Andor Technology iKon Series 빠른 시작 매뉴얼

{카테고리_이름} Andor Technology iKon Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andor Technology iKon Series 2 페이지.

페이지 인쇄

iKon Series Quick Start Guide

For iKon L (936) and iKon-M (934) models

Prepare your Facility

Handle the camera and accessories with

care.

Observe anti-static precautions when

installing the controller card and camera.

Ensure 100 mm clearance around camera

and power supply vents (Do not block vents

when operating on benchtop).

Operation of the camera close to intense

pulsed sources (e.g. plasma and X-ray

sources) may compromise performance.

Keep dry, <70% humidity non-condensing.

Use correct power supply and cables.

Store between -25°C and 50°C.

Operate between 0°C and 30°C.

Refer to the user manual for further information

Unpack the Camera

Camera

Essentials

Documentation

Software

scan or visit:

(copy supplied)

andor.oxinst.com/

welcome

iKon-M or L Camera

(model as ordered)

Hex Key Set

Install Software (SDK2 or Solis)

You must have administrator access on your PC to perform this installation.

These instructions cover installation of both Andor Solis and Andor SDK if ordered. A copy of the software is provided

within the camera box. Additionally, the latest software files are available to download on request, please sign in or

create an account at

andor.oxinst.com/downloads

Windows: Switch on the PC, run the setup exe from the supplied copy or the downloaded file: e.g. AndorSDK2Setup-

<version>.exe

1. Confirm the version of software (minimum is v2.1x)

2. Follow the on screen prompts.

3. Select the installation directory when prompted.

4. If prompted for camera type select iKon.

5. On the final window click on "Install". Continue to follow the on screen prompts.

6. To complete the installation, when prompted select "Yes, restart the computer now" and click on the finish button.

Linux:

For detailed instructions on how to install the SDK drivers on Linux please refer the Andor SDK2 Manual, available at

andor.oxinst.com/downloads.

Cables

USB 2.0 Cable

Trigger Cable

Country Specific

1 x BNC to SMB

Power Cord

Power Supply

PS-40 to Camera

1x iKon-M

Cable

2x iKon-L

iKon-L models only