Andor Technology AD02 빠른 실행 매뉴얼 - 페이지 2

{카테고리_이름} Andor Technology AD02에 대한 빠른 실행 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andor Technology AD02 4 페이지.

(1) Select Temperature from the Hardware drop-down menu and the Temperature dialog box appears:

(2) Select Cooler On and either type in the required temperature or drag the Temperature Setting

slider bar to the required value.

(3) Alternatively, clicking on the

Temperature setting screen. This icon displays the current CCD temperature (to the nearest 5ºC), in

red whilst it is cooling, e.g.

temperature is reached.

Click either the

Set Acquisition Mode to

Single:

The sensor is now ready to read out a signal in Image mode. The received signal will show the status of focus

and alignment.

NOTES:

1. Before taking a signal acquisition, ensure the optical path is clear (e.g. shutter is open, etc.)

2. Exposure Time may need to be increased if light levels are too low.

 Click either the

 Alternatively, click either the

click either the

QUICK LAUNCH GUIDE FOR

STEP 4 - SWITCH ON THE COOLING

icon in the bottom-left hand corner of the screen will also open the

. It will revert to blue and display the temperature when the correct

STEP 5 - SETUP ACQUISITION

button and a Setup Acquisition dialog box similar to the following appears:

Set Triggering to

Internal:

button to take a single acquisition.

button to take a continuous acquisition. To stop this acquisition,

button at any time.

Set Readout Mode to

Image:

Page 2 of 4

CAMERAS

Set Exposure Time to

0.1 seconds: