Compac Master MR40S 설치 및 설정 지침 - 페이지 7
{카테고리_이름} Compac Master MR40S에 대한 설치 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac Master MR40S 17 페이지.
페이지 인쇄Gilbarco Pump comms Setting
6.2
(Special software and interface board required)
1-OFF
2-ON
3-OFF
4-ON
Triac Dip-switches
7.
Important note:
Great care should be taken not to accidentally change the setting of these switches while
working in the Flame-proof box. Operating the unit with these incorrectly set can result in
damage to the C4000 Power Supply or incorrect operation of the triacs.
These switches are set in the factory and should not be changed.
If they are accidentally changed these are the correct settings for Master / Premier Dispenser
applications.Note: They are 3 position switches
SW1
SW2
SW4
\\Cilaklfs1\shrdata\Masters\Installation Sheets\Master & Premier\MR40S MR80S Installation
Dispenser (low current output)
2
2
2
Sheet.doc
Page 7 of 17