Compac MR160P 설치 및 설정 지침 - 페이지 11
{카테고리_이름} Compac MR160P에 대한 설치 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac MR160P 18 페이지.
페이지 인쇄10.2.2
Setting the Price
Using the Parameter Switch, follow the chart to set the price for the hose(s) in question.
Step
ACTION
1
Ensure that the nozzle is hung up
2
Press and Hold the Parameter switch until the
"Price per litre" is displayed.
3
Press and hold the Parameter switch.
4
When the digit is correct, release the Parameter
switch.
5
Repeat steps 3 and 4 for each digit of the 'Price per
litre'.
6
Press and release the Parameter switch 8 or more
times in quick succession
7
Repeat steps 3 to 5 above.
\\Cilaklfs1\shrdata\Masters\Installation Sheets\Master & Premier\MR160P Installation
RESULT
Dispenser in idle state
The price for side 'A' is shown as 'PX.XXX' on the
litres display and 'PrA' is displayed on the money
display.
A digit, of the displayed 'Price per litre', will begin to
increment.
NOTE: the C4000 will reset itself if the Parameter
switch is left for more than 60 seconds.
Continue for Dual hose units
The price for side 'B' is shown as 'PX.XXX' on the
litres display and 'Prb' is displayed on the money
display.
Sheet.doc
Page 11 of 18