Dremel 940 사용 설명서 - 페이지 5
{카테고리_이름} Dremel 940에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dremel 940 8 페이지.
페이지 인쇄
colours, it is recommended to cut the sticks into
3 cm pieces before inserting into the glue gun.
GG01 = Multipurpose glue, 7 mm
GG02 = Multipurpose glue, 7 mm
GG03 = Wood glue, 7 mm
GG04 = Glitter glue, 7 mm
GG05 = Colour glue, 7 mm
GG11 = Multipurpose glue, 11 mm
GG13 = Wood glue, 11 mm
NOTE: Do not use glitter or colour sticks at high
temperature. The drip-control function will not
work properly.
CHANGING GLUE STICKS
•
Do not attempt to remove the unused
portion of the glue stick from the tool.
•
If you need to switch glue sticks, empty the
melting chamber by squeezing the trigger
and insert new stick.
CHANGING NOZZLES (940)
•
Before changing nozzles, make sure tool is
cool to the touch, unplugged, and the switch
is in the "off" position.
•
Use a spanner and turn the nozzle from
the housing.
•
Mount a new nozzle on the housing.
STAND / KICK STAND
When glue gun is hot, do not lay on its side.
Always use stand.
•
Push stand D into "down" position when
temporarily not in use (910, 930).
•
Push the stand release button H to release
the stand (940).
When re-using or storing, push stand back into
"up" position.
MAINTENANCE AND CLEANING
NO USER SERVICEABLE PARTS
!
INSIDE. PREVENTIVE
MAINTENANCE PERFORMED BY
UNAUTHORIZED PERSONNEL MAY
RESULT IN INCORRECT CONNECTION
OF INTERNAL WIRING AND
COMPONENTS WHICH COULD CAUSE
SERIOUS HAZARD.
Always keep the tool clean so that it functions
properly and accurately.
TO AVOID ACCIDENTS, ALWAYS
!
DISCONNECT THE TOOL AND/OR
CHARGER FROM THE POWER SUPPLY
BEFORE CLEANING
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean the tool by inserting pointed
objects through an opening.
CERTAIN CLEANING AGENTS AND
!
SOLVENTS DAMAGE PLASTIC
PARTS. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
SERVICE AND WARRANTY
We recommend that all tool service be
performed by a Dremel Service Centre.
This Dremel product is guaranteed in
accordance with statutory/country-specific
regulations; damage due to normal wear
and tear, overload or improper handling are
excluded from the warranty.
In case of a complaint, send the undismantled
tool and/or charger and proof of purchase to
your dealer.
CONTACT DREMEL
For more information on service and warranty,
the Dremel product range, support and hotline,
go to www.dremel.com.
DISPOSAL
The tool, accessories and packaging should be
sorted for environmental-friendly recycling.
ONLY FOR EC COUNTRIES
According the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right,
power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly manner.
ONLY FOR UNITED KINGDOM
Only for United Kingdom:
According to The Waste Electrical and
Electronic Equipment Regulations 2013 (SI
2013/3113) (as amended), products that are
no longer usable must be collected separately
and disposed of in an environmentally friendly
manner.
5
3
3