Compac WD500 G1 운영 매뉴얼 - 페이지 7

{카테고리_이름} Compac WD500 G1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac WD500 G1 15 페이지. Wheel dolly

Using the wheel dolly

Figure 3

Picking up wheels from the ground

1. By setting the fork distance, you can pick up a standing wheel from the floor. The distance

between the rollers must be approx. 0.6 times the wheel diameter.

2. With the forks in the lowest position, move them in under the wheel as far into the lifting bed as

possible.

3. Note that the wheel is now resting against the crossbeam (Figure 3 A).

4. Secure the wheel using the safety bar (Figure 3 B). There are two safety bar sizes: the long bar

for dual wheels and the short bar for ordinary wheels. The safety bar should rest against the

wheel when the height barrier is lowered (Figure 3 C) and is locked using the locking screw

(Figure 3 D).

(EN)

5374 WD500 G1 (EN).docx

Knowhow is the difference

7 / 15

2020-01-24 R1.1 S1