Compac WD800 사용 설명서 - 페이지 3

{카테고리_이름} Compac WD800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac WD800 9 페이지. Wheel dolly

Oil quantity: 0.6 litres.

DO NOT use brake fluid or motor oil !

In case the hydraulic unit has a lack of oil or has been taken apart in order to replace the seals, then

fill up to the correct oil quantity. Activate the pump handle and add oil slowly through the filling hole at

plug B. The arm must be in minimum position at oil filling. Warning! To much oil quantity might cause

problems to the hydraulic system. Please note! Use only hydraulic oil with a gradation (viscosity) of

ISO32 (CASTROL HYSPIN AWS 32 or equivalent)

Decommissioning:

If the WD should ever be scrapped, draw off the oil into an approved container and dispose it at an

approved authority.