Compac Furniture CUBO CUB-CU128-FP 조립 설명서 - 페이지 5

{카테고리_이름} Compac Furniture CUBO CUB-CU128-FP에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Compac Furniture CUBO CUB-CU128-FP 8 페이지.

CUBO CUB-CU128-FP

Now we can put it all together.........................

STEP FIVE: Attach Horizontal SHELVES to the 1st END

•

Take an END and two SHELVES (Note, all shelves, horizontal or vertical, are identical).

•

Connect the H1 CONNECTING BOLTS installed in the End to the H2 Cams installed in the Shelves as shown

below. Ensure that the Groove in the Shelf is facing upwards.

•

Turn the H2 Cams installed in the Shelf in a clockwise direction to lock the End and the Shelf together.

These should turn at least a ½ to a ¼ turn.

Shelf

STEP SIX: Attach the 2nd END

•

Take the other END

•

Connect the H1 CONNECTING BOLTS installed in this 2

shown below.

•

Turn the H2 Cams installed in the Shelves in a clockwise direction to lock the End and the Shelf together.

These should turn at least a ¼ to a ½ turn.

For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858

END to the H2 CAMS installed in the SHELVES as

End