AirTech ACR60 설치 및 배선 지침
{카테고리_이름} AirTech ACR60에 대한 설치 및 배선 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTech ACR60 12 페이지.
ACR60
ACR60LV
Installation and Wiring Instructions
SAFETY AND GUIDANCE NOTES
All wiring to be in accordance with the current I.E.E. Regulations, or
the appropriate standards of your country and MUST be installed
by a suitably qualified person.
The Fan should be provided with a local isolator switch capable of
disconnecting all poles, having a contact separation of at least
3mm.
Ensure that the mains supply (Voltage, Frequency, and Phase)
complies with the rating label.
The Fan should only be used in conjunction with the appropriate
Airtech products.
The fan should only be used in conjunction with fixed wiring.
When the Fan is used to remove air from a room containing a fuel-
burning appliance, ensure that the air replacement is adequate for
both the fan and the fuel-burning appliance.
The Fan should not be used where it is liable to be subject to direct
water spray for prolonged periods of time.
Where ducted Fans are used to handle moisture-laden air, a
condensation trap should be fitted. Horizontal ducts should be
arranged to slope slightly downwards away from the Fan.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Young children should be supervised to ensure that they do not
play with the appliance.
This product should not be disposed of with household waste. Please recycle where facilities exist. Check with
your local authority for recycling advice.
IPX4