Electrolux ICON E36GC75DSS 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Electrolux ICON E36GC75DSS에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ICON E36GC75DSS 20 페이지. Gas cooktop
Electrolux ICON E36GC75DSS에 대해서도 마찬가지입니다: 사양 (1 페이지)

페이지 인쇄

GROUNDING INSTRUCTIONS

For personal safety, the cooktop must be properly grounded. For

maximum safety, the power cord must be plugged into an

electrical outlet that is correctly polarized and properly grounded.

DO NOT operate the cooktop using a 2-prong adapter or an

extension cord. If a 2-prong wall receptacle is the only available

outlet, it is the personal responsibility of the consumer to have it

replaced with a properly grounded 3-prong wall receptacle installed

by a qualified electrician.

See the INSTALLATION INSTRUCTIONS packaged with this

cooktop for complete installation and grounding instructions.

WARNING

This appliance is equipped with a 3-prong grounding plug for your protection

against shock hazard and should be plugged directly into a properly grounded

receptacle. DO NOT cut or remove the grounding prong from this plug.

Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an

extension cord, or remove grounding prong from electrical power cord. Failure

to follow this warning can cause serious injury, fire or death.

LIQUEFIED PETROLEUM (PROPANE) GAS CONVERSION

This appliance can be used with Natural Gas and Propane Gas. It is shipped from the

factory for use with natural gas.

A kit for converting to LP gas is supplied with your cooktop. The kit is marked FOR LP/

PROPANE GAS CONVERSION. Follow the installation instructions which are inside the

envelope.

The conversion must be performed by a qualified service technician in accordance with the

kit instructions and all local codes and requirements. Failure to follow instructions could

result in serious injury or property damage. The qualified agency performing this work

assumes responsibility for the conversion.

WARNING

Severe shock, or damage to the cooktop may occur if the cooktop is not installed by a qualified installer or electrician.

CAUTION

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application

needs must be made by a qualified service technician in accordance with the manufacturers instructions and all

codes and requirements of the authority having jurisdiction. Failure to follow the instructions could result in

serious injury or property damage. The qualified agency performing this work assumes responsibility for the

conversion.

Getting Start

Grounding

type wall

receptacle

Power supply cord with

3-prong grounding plug

Do not, under any

circumstances, cut,

remove, or bypass the

grounding prong.