AirTech 3AV130 수리 지침 - 페이지 6

{카테고리_이름} AirTech 3AV130에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTech 3AV130 10 페이지.

Repair Instructions 3AV 30 - 430

Reassembling Shaft Seal Housing

2.2

Set motor on air ventilation cap

Install distance springs (950, with molykote coated) on the impeller adjusting screw (906). Be carefull

because the distance springs should be mounted as shown in the picture above. Coat the thread of

impeller adjusting screw also with molykote

Tread in the impeller adjusting screw into the motor shaft

Align the studs of the motor flange with the holes of the shaft seal housing (441)

Install four washers on the studs of the motor flange

Thread on four nuts on the studs of the motor flange and tighten nuts.