AirTech 3AV255 수리 지침 - 페이지 6
{카테고리_이름} AirTech 3AV255에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTech 3AV255 10 페이지.
Repair Instructions 3AV 30 - 430
Reassembling Shaft Seal Housing
2.2
Set motor on air ventilation cap
Install distance springs (950, with molykote coated) on the impeller adjusting screw (906). Be carefull
because the distance springs should be mounted as shown in the picture above. Coat the thread of
impeller adjusting screw also with molykote
Tread in the impeller adjusting screw into the motor shaft
Align the studs of the motor flange with the holes of the shaft seal housing (441)
Install four washers on the studs of the motor flange
Thread on four nuts on the studs of the motor flange and tighten nuts.
6