Electrolux KGS6424X 사용자 설명서 - 페이지 11

{카테고리_이름} Electrolux KGS6424X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux KGS6424X 20 페이지.
Electrolux KGS6424X에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄
Electrolux KGS6424X 사용자 설명서
3.7 Replacement of the
connection cable
The replacement of electric
cable must be carried out
exclusively by the service
force centre or by personnel
with similar competencies, in
accordance with the current
regulations.
To replace the connection
cable use only H03V2V2-F
T90 or equivalent type.
Make sure that the cable
section is applicable to the
voltage load and the working
temperature. The yellow/
green earth wire (B) must be
approximately 2 cm longer
than the live and neutral wire
(A).
1. Connect the green and yellow (earth)
wire to the terminal which is marked
with the letter 'E', or the earth symbol
, or coloured green and yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the
letter 'N' or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the
letter 'L'. It must always be connected
to the network phase. There must be
no cut or stray strands of wire
present. The cord clamp must be
correctly attached to the outer
sheath.
A
B
3.8 Assembly
1.
2.
3.
min. 600 mm
min. 100 mm
min. 55 mm
30 mm
2
+
0
4.
50 mm
ENGLISH
11
min. 650 mm
+
2
560 mm
0
400 mm