Atlantic F120 Design 운영 매뉴얼 - 페이지 9

{카테고리_이름} Atlantic F120 Design에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic F120 Design 13 페이지.

페이지 인쇄

1. First Switching on

LOCK APPLIANCE CONTROL BOX

To avoid manipulations by children, you can lock

appliance control box pressing buttons

the same time. Hold buttons around 3 seconds.

The screen shows

locked.

Make same operation to unlock the appliance

control box. The screen shows

APPLIANCE SETTINGS

Press the button

pictogram

lights up. The settings menu contains:

– SETTING THE TIME AND DAY OF THE WEEK

Using buttons

and

Set the hour

. Set the minute

the week

(1 – Monday, 2 – Tuesday...).

Note: after appliance switch Off / On, it may be

necessary to re-set the time and day of the

week.

– ACTIVATION / DEACTIVATION THE OPEN

WINDOW DETECTION

Allows to detect the temperature change caused

by opening and closing the window. If you forget to

switch off the appliance before long-term ventilation

of the room, this function prevents unnecessary

heating.

Using buttons

and

Activate / deactivate function of the open window

detection (

If appliance detects that window is opened, the

parameter

flashes on the screen and appliance

switches automatically to frost protection mode

(7°C).

If appliance detects that window is closed or the

cycle is stopped manually, the parameter

disappear from the screen and appliance will return

to the previous operating mode.

To manually stop the open window detection

cycle:

- Using buttons

and

- Confirm using button

Note: it is not recommended to use this function

in rooms with a draught, for example in

corridors or in rooms near the front door.

– PROGRAM FOR EACH DAY OF THE WEEK

7 programs are preset. By default, programs are

already assigned for each day.

Comfort

Eco

Comfort

Eco

Comfort

Eco

Comfort

Eco

Comfort

Eco

Comfort

Eco

Comfort

Eco

It is possible to change the program for the day you

want. Using buttons

. Select a day for programming e.g., Monday

. Select program from P1 to P7 for selected day.

Repeat these steps to select the program for each

day of the week.

and

. Appliance control box is

until the indicator below the

, select parameter

. Set the day of

, select parameter

18h

12h

18h

14h

18h

12h

18h

and

, select parameter

– PROGRAMS CHANGE

It is possible to change the preset programs. For

each program (from P1 to P7) it is possible to select

operating mode hourly (from 0 to 23 hours). Using

buttons

and

the program for changing

operating mode for each hour

Repeat these steps to change all programs.

APPLIANCE SETTINGS MENU

Exit the settings

will

Exit the settings

EXPERT MENU

To access the advanced functions of the

device, press and hold 2 buttons around 3

seconds.

;

– CALIBRATION

It is possible to adjust the temperature measured

by the appliance according to the room temperature.

The calibration value is from -3°C to +3°C comparing

to the temperature shown on the screen.

– MAXIMUM TEMPERATURE

It is possible to change the temperature, which

cannot be exceeded (from 19°C to 28°C). By default,

21h

the maximum temperature is 28°C.

– HEATING INDICATOR

It is possible to switch off the heating indicator,

21h

when appliance is in standby mode. To switch off the

21h

indicator, choose parameter «oF».

21h

– SCREEN

It is possible to choose which temperature to show

21h

on the screen before switching to standby mode:

- «St» to show the set temperature.

24h

- «Pt» to show the measured temperature.

– FACTORY SETTINGS

It is possible to reset appliance to factory settings.

Choose

parameter

temperature set-point 19°C, Programming by default.

, select parameter

. Select the

«Go».

Comfort

. Select

mode,