Compact Light System CLS DMX16 사용자 설명서 - 페이지 7

{카테고리_이름} Compact Light System CLS DMX16에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Compact Light System CLS DMX16 8 페이지. 16 channels dmx light mixer

Programming the CLS DMX16 - Advanced Mode.

1. The first you see when you connect the power is a light in the first led. This tells

you that the DMX16 is in Mix Mode, Group 1 is activated and the faders will work at

DMX Ch. 1-4.

2. Grp/Smoke:

Choose a group that you want to mix by pressing and holding the Grp while

pressing a Flash button. The Leds on selected groups will light up. It is

possible to select more than 1 group, up to 4, at the same time.

The leds will light up. In Program Mode the Grp knob will send out DMX Channel 17

when pressed in. (Value 256) This is useful for controlling a DMX Smoke Machine.

3. Mem: Store:/Blackout.

Press and hold the Mem knob while pressing a Flash button to memorize a program.

It will overwrite an earlier programming on the same flash knob. It`s possible to make

4 programs(scenes) in the memory, one for each flash knob. In program mode the

Mem knob function is Blackout. (Sending out value 0(Zero) to all channels) Push a

flash knob to go out of blackout and in to a program.

4. Edit: Fast select/Main flash:

Press and hold the Edit knob while pressing a flash knob to make fast selections of a

program to edit in the mix-function.

This function makes it possible for a scene that is already stored, to be changed and

stored again without setting all channels from the beginning. In program mode the

Edit knob will function as a Main Flash knob. Pressing this will send value 256(full)

to all DMX channels. Release it to go out of Main Flash and back to the program.

5. Prg: Program-function:

One pressure: ON for user programmed scenes. (The leds will flash as a chase)

Then press flashknobs to changes scenes.

Next pressure: OFF to go back to the mix-function. (All the leds will flash when

pressed in) No groups are activated.

Make the group(s) selections, and the faders/flash knobs are in manual setting.

6. Fader functions:

CLS DMX16 mixer has 4 Faders. They are multiprocessing,

dependent of the functions-setting of the mixer.

A. If selected mix-function, the faders will have the same function as on other mixers.

B. If the mixer is set in program function, Fader 1 will act like a Adjustable-Pause

controller and Fader 2 will act like an Adjustable-Speed controller (Cross Fade speed

between programs). Automatic select of scenes (Chase) will be activated when Fader

1-(Pause) is out of the full position. Manual select of scenes is activated by pressing

flash knobs 1-4. The speed for change of scenes will depend on the Fader 2-position.

(Cross Fade in to the next program)