Andres Industries 299090 사용 설명서 - 페이지 5

{카테고리_이름} Andres Industries 299090에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andres Industries 299090 7 페이지.

Andres Industries 299090 사용 설명서
Delivery
1x aiRack-10
1x power cable (type B, C, G or J)
1x allen key (key width: 2,5 mm)
20x cylinder head screw M3x6 (ISO 4762/DIN 912)
20x toothed lock washer 3,2 (DIN6797)
Pre-commisioning
1. Put an iPad into the propper aiShell.
(according aiShell-instruction-manual)
2. Open the lower rubber plug to get access
to the loading port.
3. Insert the Connector (after checking the
o-ring) in the lower opening of the aiShell.
4. Place one toothed lock washer (enclosed
with the aiRack) in each screw hole of the
Connector.
5. Screw the Connector to the aiShell with the
enclosed cylinder head screws.
!
Attention
Before the iPad can be removed from the aiShell the Connector HAS
TO BE removed. Afterwards for the removal of the iPad follow the steps
described in the aiShell manual vice versa.
If you try to remove the iPad with the Connector attached to the aiShell
the Connector will be damaged!
5