Electrolux 922727 설치 매뉴얼 - 페이지 23
{카테고리_이름} Electrolux 922727에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 922727 28 페이지. Built-in hood for electric and gas oven
G
COMMISSIONING AND SETTINGS
Introduction
G.1
CAUTION
Make sure the appliance is
connected to a water
drainage system, a power
socket, and to the oven
via the oven/hood
Interface cable.
Switch the oven on as indicated in the Installation
Manual (chap. G "COMMISSIONING AND
SETTINGS").
CAUTION
During operation, pay
attention to the hot areas
of the outer surface. Do
not place objects on the
outlets located at the
upper rear of the
appliance.
G.2 Oven settings
When the hood is switched on for the first time,
execute
following procedure on Oven:
-
AL01 IM_HO_L1_L2_L3_L4
with TOUCH Oven (see annex document) or
-
AL02 IM_HO_L1_L2_L3_L4
with DIGIT Oven (see annex document).
These procedures must be completed in order to
ensure correct operation of the hood and to allow
its use.
The checking procedure consists of 2 main steps:
1. Only for Level 4 Hood, check that the hood
symbol is present on the oven interface (Touch
Screen Panel); or
2. test hood operation by switching the oven on
and start a test program. Simulate oven door
opening and closing: the fan should change
speed.
23