Electrolux CH90 지침서 - 페이지 11

{카테고리_이름} Electrolux CH90에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux CH90 21 페이지. Cooker hood
Electrolux CH90에 대해서도 마찬가지입니다: 지침서 (21 페이지)

Please ensure that when the appliance is

installed it is easily accessible to an engineer

in the event of a breakdown.

All installations must comply with the local

authorities requirements for the discharge

of exhaust air.

Incorrect installation may affect the safety

of this cooker hood.

Before installation check that the wall to

which the cooker hood is to be fitted for

electric cables, water pipes and gas.

This cooker hood is designed to be fixed to any

vertical surface over a cooking area, and can be

used in the extraction (ducted to the outside) or

recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

INSTALLING THE COOKER HOOD

(Optional Splashback B)

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance

with relevant regulations controlling this type of

installation.

Unpacking

The cooker hood is supplied with the following

components for installation:

•

Ducting spigot 150 to 120mm (A)

•

Canopy (C)

•

Ducting Collar (D)

•

Lower chimney stack 530mm (I)

•

Recirculation spigot (R)

•

Upper chimney stack 215mm (S)

Fixing kit comprising:

•

Wall fixing brackets (1 and 2).

•

Document pack.