Electrolux CH90 지침서 - 페이지 14

{카테고리_이름} Electrolux CH90에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux CH90 21 페이지. Cooker hood
Electrolux CH90에 대해서도 마찬가지입니다: 지침서 (21 페이지)

Fitting the Canopy Hood

Adjust the two screws V on the top of the

canopy to about halfway as illustrated in

Fig. 5.

Hook the canopy onto the wall bracket 1

and push down until the canopy adjusting

screws V rest on the bracket, turn the

screws to adjust the canopy vertically and

level it horizontally as illustrated in Fig. 5.

Insert the screw V1 into the central hole to

lock the canopy in to position as illustrated

in Fig. 5.

Electrical connection and working test

Before fitting the chimney to the canopy make the

electrical connection as described in the section

titled "ELECTRICAL CONNECTION".

When the electrical connection has been made,

test the three speed fan and worktop illumination.

Venting

The hood is more effective when used in the

extraction mode (ducted to the outside). Venting

kits may be purchased through your retailer

or DIY store, and must be ducted to an outside

vent of 125mm (5").

The ducting used must be manufactured

from fire retardent material conforming

to the relevant British Standard or DIN

4102-B1.

When the cooker hood is ducted to the outside the

charcoal filters must be removed.

Recirculation

The cooker hood is supplied specified for use in

the recirculation mode, with the charcoal filters

fitted.

In the recirculation mode contaminated air is

passed through the charcoal filters to be purified

and recirculated into the kitchen through the grille

outlets on either side of the chimney (I).

To fit the recirculation spigot (R), place the spigot

over the outlet on top of the canopy and push

down on the spigot until it snaps into position as

illustrated in Fig. 6.

Fig.5

Fig.6