Andrew Barton POWER PRO-DRY 5129ABBU 매뉴얼 - 페이지 6

{카테고리_이름} Andrew Barton POWER PRO-DRY 5129ABBU에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew Barton POWER PRO-DRY 5129ABBU 8 페이지. 2200w ionic dryer

INSTRUCTIONS FOR USE

• Ensure the hair is towelled dry and combed through to remove

tangles prior to styling.

• Plug the appliance into a suitable mains socket.

• Select the required heat and speed settings.

• ALWAYS ensure to keep hair away from the rear filter to prevent it

being sucked into the fan as this may cause the dryer to overheat.

• Use the high heat / high speed settings (II/III) for initial drying and

the low heat / low speed settings (I) to finish drying and for styling.

• Set styled hair with cool air using the cool shot button.

• For additional control when styling, attach the concentrator nozzle

and using the low heat / low speed settings (I), direct the airflow

along the surface of the hair to be dried.

• After use, switch off and unplug the appliance. Allow to cool

before storing away.

STYLING TIPS

Add extra body and volume to the hair by directing the airflow

towards the roots and use a brush to hold up each hair section

while drying for maximum lift. For a smooth straight look, divide

the hair into sections and with the concentrator nozzle attached,

use a brush to hold the hair taut as you dry.

CLEANING & MAINTENANCE

To keep your hairdryer in the best possible condition and

maintain optimum performance, the rear filter should be cleaned

on a regular basis.

• Ensure the appliance is switched off, unplugged and cool.

• To remove the filter, simply turn it gently then lift away from the

dryer. Using a soft brush, clean any hair and debris from the rear

mesh of the dryer and the rear filter itself.

• Replace the rear filter before using the dryer again.

Care of your dryer

• Do not use the dryer at a stretch from the power point. Stretching

the connection between the lead and the dryer can be dangerous.

• Always keep the rear of the dryer away from your hair during use