Electrolux DF 1090 운영 및 설치 매뉴얼 - 페이지 8

{카테고리_이름} Electrolux DF 1090에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux DF 1090 17 페이지.

Warning

• Failure to observe the instructions on cleaning the unit and changing

the filters will cause a fire hazard. You are therefore strongly

recommended to follow these instructions.

• The manufacturer declines all responsibility for any damage to the

motor or any fire damage linked to inappropriate maintenance or

failure to observe the above safety recommendations.

Changing the light bulbs

• Disconnect the cooker hood from the mains supply.

• Extract the extractable drawer.

• Remove the suction grill.

• Replace the old bulb with a new one of the same type.

• Re-mount the suction grill.

• If the light does not come on, make sure the bulb has been inserted

in correctly before contacting your local Service Force Centre.

• Clean the outside of the hood using a damp cloth and a solution of

water and mild washing up liquid.

• Never use corrosive, abrasive or flammable cleaning products or

products containing bleach. .

• Never insert pointed objects in the motor's protective grid.

• Only ever clean the switch panel and filter grill using a damp cloth

and mild washing up liquid.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.