Dressler ARA-100 HDX 설치 정보 - 페이지 5

{카테고리_이름} Dressler ARA-100 HDX에 대한 설치 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dressler ARA-100 HDX 8 페이지.

페이지 인쇄
Interconnect Diagram for the Dressler
ARA 60 and ARA 2000 antenna Installation
Provides continuous coverage from 40 kHz to 2000 MHz
ARA
2000
VHF
UHF
N (M) to N (F)
RG-58/U or
"To Active Ant"
LMR-240/UF
N to BNC
Coax
(Adapter)
To 120 VAC line
Notes:
1.
A 0.75 amp slow-blow fuse is located inside of the RSM-2000 unit. This may be accessed for inspection or replacement by removing the top cover on the RSM unit. Replacement fuses are
available from BPT or you may use Radio Shack (or equivalent) P/N 279-1062 0.75 A, slow-blow, 5X20 mm, GMA type.
2.
The RSM-2000 also contains a variable RF attenuator for use when the receiver in use has a low tolerance for external gain. The unit is set for maximum signal at the time of test. To
decrease the signal, turn the blue slug (located on the side of the RSM-2000) in the counter clockwise direction. The attenuation range is typically about 0-20 dB.
RSM 2000
DC Supply
PS-120
B
,
roadband Power Technology
3945 North 900 West, Pleasant View, UT 84414-1055 Ph: 801.732.0924 Fx: 801.732.0891
Website: http://www.bptec.com
HF input -
UHF input -
Use BNC to
Use BNC to
PL-259 cable
N(M) cable
YOUR
HF/UHF
RECEIVER
To 120 VAC line
5
RSM 2000
"To Active Ant"
N to BNC
(Adapter)
DC Supply
PS-120
ARA
60
VLF
HF
RG-58/U
Coax