Andrew Harris Woodwork Chest of Drawers Plans 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} Andrew Harris Woodwork Chest of Drawers Plans에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew Harris Woodwork Chest of Drawers Plans 15 페이지.
페이지 인쇄¼ inch ply
22.5 by 30.5
Step 1 – Make the two Side panel inserts
I made the inserts for the sides from 4 four pieces of 1 by 4 and I slightly routed the edge at 45 degrees.
If you don't have a router and still want some detailing to make the sides looked paneled then just sand
the edges of each piece slightly round before joining them together.
Put the pocket holes on the inside and also put a pocket hole in the top and bottom of each piece to fix
to the top and bottom rails.
If you prefer you can use a piece of plywood for a solid panel look instead.
www.andrewharriswoodwork.com
2
For back panel (fitted from
inside)
Page 5 of 15