Andrew James AJ000069 매뉴얼 - 페이지 3

{카테고리_이름} Andrew James AJ000069에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew James AJ000069 6 페이지. Apple peeler and slicer

Take the handle (9) and push the threaded hole to the end of the

shaft (8). Hold the shaft still with one hand and turn the handle

clockwise until it is tight.

Press the screw regulator (10) and the slide shaft back to its full

capacity.

Attach the appliance to any flat smooth surface by holding the base

(11) with one hand and pushing the clamp lever with the other hand.

The appliance should be fully attached to the surface.

Push the apple, stem end first all the way onto the prongs as

illustrated in the diagram below

Ensure that the peeling blade armature (4) is standing upright and

the catch is disengaged. Turn the handle until the apple is against the

eye of the coring/slicing blade (2)

Undo the coring/slicing blade wing nut (3) and align the eye of the

coring/slicing blade with the centre of the apple and then tighten the

coring/slicing blade wing nut.

Turn the handle in a clockwise fashion until the apple is completely

sliced and cored.

Carefully pull the apple from the prongs whilst holding the shaft with

the other hand. Turn the handle anti-clockwise to release the core

from the shaft.

Peeling, Coring and Slicing