Andrew James AJ000571 매뉴얼 - 페이지 5

{카테고리_이름} Andrew James AJ000571에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew James AJ000571 9 페이지. Electric milk frother

Andrew James AJ000571 매뉴얼
Before first time use
 Fully clean the inside of the appliance
with a damp cloth.
 Ensure that the appliance and the base
are connected correctly.
Operating the appliance
Cold frothed milk
 Make sure the whisk is inserted into the
appliance and that you have filled it up
to the lower maximum level.
 Plug the appliance into the wall socket,
a beep sound will signal that it is turned
on.
 Place the lid on the appliance and hold
the operation button for three seconds,
the operation button will turn blue to
indicate that it is on the cold froth milk
setting.
 The milk frother will now froth the milk
and stop automatically after the process
has finished.
 Remove the lid of the appliance and
spoon the frothed milk out of the jug.
Hot frothed milk
 Make sure the whisk is inserted into the
appliance and that you have filled it up
to the lower maximum level.
 Plug the appliance into the wall socket,
a beep sound will signal that it is turned
on.
 Place the lid on the appliance and press
the operation button, the operation
button will turn red to indicate that it is
on the hot frothed milk setting.
 The milk frother will now froth the
milk and stop automatically after the
process has finished.
 Remove the lid of the appliance and
remove the frothed milk with a spoon.
Note: The hot foamed milk will be
around 62-72˚C.
Warm milk
 Make sure the whisk is inserted into
the appliance and that you have filled
it up to the higher maximum level.
 Place the lid on the appliance and
quickly press the operation button
twice, the operation button will turn
red to indicate that it is on the hot
milk setting.
 The milk frother will now warm the
milk and stop automatically after the
process has finished.
 Remove the lid of the appliance and
pour out the hot milk, always holding
the milk jug by the handle.
Frother attachment
 Securely
fit
attachment to the shaft at the bottom
of the jug.
 Ensure the attachment is correctly
the
milk
frother