Andrew James AJ000632 매뉴얼 - 페이지 14
{카테고리_이름} Andrew James AJ000632에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew James AJ000632 16 페이지.
페이지 인쇄
Troubleshooting Guide
Problem
Unit doesn't switch on
Plate does not move
Excessive vibration
Class II Electrical Safety
Always ensure the voltage on the rating
label corresponds to the power supply
where the product is being used.
Class II double insulation. This
appliance is double insulated
therefore no earth connection is
required.
Check the power cord and plug regularly
for any damage. If the cord or the plug is
damaged, it must be replaced by a
qualified electrician or a service repair
centre to avoid a hazard.
Cause
Switch ring and switch
dent is not in position
Foreign substance is in
switch
Movement stops due to
excessive load
Foreign substance is
stuck around the step of
the container
Foreign substance is
stuck in the depression
of the main unit
The container is too full Remove vegetables
Operating on an uneven
surface
Precautions should be followed for safe
cable management and connection to
the power supply
If a new mains plug needs to be fitted
follow the fitting instructions supplied
with good quality BS1363A plugs. If in
doubt consult a qualified electrician or
appliance repair agent.
a) Remove and safely dispose of the old
plug.
b) Connect the brown lead to the live
14
Solution
Place the switch in
position
Remove foreign
substance
Disconnect plug. Leave
for 1 hour before
removing the food
product.
Remove foreign
substance
Remove foreign
substance
from container
Operate on a flat
surface