Andrew James Deluxe BBQ 매뉴얼 - 페이지 7
{카테고리_이름} Andrew James Deluxe BBQ에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andrew James Deluxe BBQ 13 페이지. Bbq with stand
Andrew James Deluxe BBQ에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지)
페이지 인쇄
Assembling the appliance
Unpack all the components.
Take the lower legs (1) and insert one connecter (2) onto the top of each leg.
Make sure the connecter is pushed all the way down. Also make sure that
the thick end of the connector is pointing down towards the ground, and the
'elbow' is pointing in.
Inset the legs, with the connecters on them, into the lower tray (3).
Screw the connecters (4) to the lower tray (3) using the nuts and bolts
provided (5).
Take the upper legs (4) and insert them into the lower tray (3). Then insert
the base rack (6) onto the top of the upper legs.
Insert the aluminium reflector tray (7) into the base rack. Make sure to fill
the reflector with water between the minimum and the maximum levels.
Insert each side tray (8) into the base tray by clipping it into the holes.
Insert the heating element (9) into the base tray. The thermostat will fit into
the gap at the front of the base.
Add the metal grill (10) to the top of the heating element. Line up the pattern
on the bottom of the metal grill to the heating element's coils.
Take the wind shield (11) and clip it into the four holes on the back of the
base tray.
Take the warming shelf (12) and insert it into the holes in the wind shelf.
*If you wish to just use the BBQ without the lower tray follow steps 6-11, ensuring
that the BBQ is rested on a flat, secure and heat resistant surface.
Caution:
Never use the appliance without water in the reflector tray, always
ensure that the water level is between the minimum and maximum marks.
Caution:
When adding water to the reflector tray, always make sure the water
does not come into contact with the heating element.
7