Electrolux EFC 009 X 사용자 설명서 - 페이지 7

{카테고리_이름} Electrolux EFC 009 X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EFC 009 X 16 페이지. Electrolux cooker hood

For both versions:

Fix the supporting structure to the ceiling with

4 screws 5x45 and dowel (b - Fig. 5).

Sides with fixing points "c" for the external

telescopic chimney correspond to the right and

left sides (fig. 5).

The hood is supplied with installation fittings

suitable for most kinds of ceilings, but in any

case a qualified installation technician must

be consulted in order to choose the best

mounting solution.

The power plug must be disconnected

from the mains during the mounting

procedure.

Fix the upper and lower part of the utter

chimney together temporarily with one

screw "a" 2,9x6,5 (Fig. 8).

Fix the upper part of the chimney to the

supporting structure with two screws "b"

2,9x6,5 (Fig. 8).

Fit four auto locking nuts on the four pins

located on the upper side of the hood (Fig. 9).

Fit the glass part on top of the hood

Fit temporarily the hood on the supporting

structure by means of the already mentioned

pins with nuts to be inserted on the proper holes

located on the lower side of the supporting

structure.

Rotate the hood until it stops (a - Fig. 10).

Completely thighten the nuts (b - Fig. 10).

Secure the hood with one screw 4x9,5 (C -

Fig. 10).

Connect the flex tube on the connection ring.

If a no return valve is used check that it can

open correctly and is not blocked by the flex

tube

Fit the electrical plug to the power outlet.

Remove the screw that fix the two parts of the

utter chimney together.

Slide the lower part of the chimney downwards

and insert it on its proper housing on the upper

side of the hood (Fig. 11).

Fig. 8

Fig. 9

Fig. 10

Fig. 11