Daikin 3MXL24RMVJU 설치 매뉴얼 - 페이지 13

{카테고리_이름} Daikin 3MXL24RMVJU에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daikin 3MXL24RMVJU 20 페이지.

Wiring

WARNING

• Do not use tapped wires, extension cords, or starburst connections, as they may cause overheating, electric shock, or fire.

• Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain pump, etc., from the

terminal block.) Doing so may cause electric shock or fire.

• The circuit must be protected with safety devices in accordance with local and national codes, i.e. a circuit breaker.

• Use an all-pole disconnection type circuit breaker with at least 1/8 inch (3mm) between the contact point gaps.

• When carrying out wiring, take care not to pull at the conduit.

• Do not connect the power wire to the indoor unit. Doing so may cause electric shock or fire.

• Do not turn on the circuit breaker until all work is completed.

[Method of Mounting Conduit]

• When connecting indoor units for 3 rooms or more, open knockout holes without deforming the conduit mounting plate.

1) Dismount the service lid by removing the 2 screws.

2) Slide the protection plate up and remove it.

3) Pass wires through the conduit and secure them with a lock nut.

Conduit

Lock nut

■

English

Knockout hole

Conduit

mounting plate

Protection plate

Conduit mounting plate

Service lid

Stop valve cover