Atlantic TidalWave A-05 운영 매뉴얼 - 페이지 8
{카테고리_이름} Atlantic TidalWave A-05에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic TidalWave A-05 8 페이지. Tidalwave a series pumps
Atlantic TidalWave A-05에 대해서도 마찬가지입니다: 제품 설명서 (16 페이지)
페이지 인쇄
Troubleshooting Guide
Always turn off power before inspecting the pump. Failure to observe this
precaution can result in a serious accident.
Before ordering repairs, carefully read through this instruction booklet. If
the problem persists, contact your dealer.
Problem
Pump does
not start
Pump stops after
starting
Diminished
flow rate or
no water flow
Possible Cause
Power is off
Power failure
Voltage drop/
Overload
Power cord is not
connected
Pump is
overheating
Power/Current
overload
Impeller is blocked
Air lock
Obstruction in pump
or piping
Piping is too long
1-877-80-PONDS
www.atlanticwatergardens.com
Possible Solution
Turn power on
Check power supply or
contact local power company
Check/Replace the GFI (Ground
Fault Interrupter)
Connect power cord
Submerge pump/Raise water level/
Allow pump to cool
Check length/size of power cable.
Check or replace GFI
Remove debris from the
impeller chamber
Restart/Clean air valve
Clear obstruction
Reduce length of pipe