Atlantic TidalWave A-21 운영 매뉴얼 - 페이지 3
{카테고리_이름} Atlantic TidalWave A-21에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic TidalWave A-21 8 페이지. Tidalwave a series pumps
Atlantic TidalWave A-21에 대해서도 마찬가지입니다: 제품 설명서 (16 페이지)
페이지 인쇄
Prior to Operation and Installation
• When the pump is delivered, first perform the following checks.
• Check for any damage to pump and power cable that may have
occurred during the shipment.
• Check the model number to make sure it is the product that was
ordered and verify the voltage and frequency are correct.
Caution
• DO NOT operate this product under any condition other than those for
which it is specified. Failure to observe this precaution can lead to elec-
trical shock, electrical leakage, fire, water leakage or other problems.
• The pump is a 100/120 volt 60 Hz pump, please only use with a power
supply voltage within 100-120 volt 60 Hz.
• DO NOT apply any paint over the stainless steel motor body. Reduced
cooling ability will result in overheat, overload, introduce undesirable
performance reductions, periodic auto shut-off and pump malfunction.
• Never place your hand or any object in or near the inlet opening while
this equipment is operating. If pump inlet is clogged, always turn off
the power supply, fuse box or circuit breaker and wait until the motor is
completely stopped before attempting to remove any clogged material.
• Please make sure that the power plug and the AC outlet receptacle is
protected and away from water or pump discharge hose to prevent
accidental electric shock or short circuit.
• Always operate the pump completely submerged in water.
• Avoid dry operation, which will not only lower performance but can
cause the pump to overheat/malfunction, leading to electrical leakage,
shock or premature failure.
• CAUTION:
THIS PUMP IS TO BE USED IN A CIRCUIT PROTECTED BY A
GROUND CIRCUIT INTERRUPTER.
• ATTENTION:
CETTE POMPE DOIT ETRE BRANCHEE A UNE DERIVATION
PROTEGEE PAR UN DISJONCTEUR DIFFERENTIEL.
• CAUTION:
THIS PUMP HAS BEEN EVALUATED FOR USE IN WATER ONLY.
3