2 Save Energy OWL intuition-c 사용자 설명서 - 페이지 12

{카테고리_이름} 2 Save Energy OWL intuition-c에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2 Save Energy OWL intuition-c 16 페이지. Room sensor [rbt-3c] with network owl

페이지 인쇄

11.

Important Information

•

OWL Intuition-c is designed to intelligently help you save energy and money. Actual

savings depend upon individual home and heating system characteristics, lifestyle /

occupancy patterns and set up preferences.

•

The Boost feature adds the Boost Temperature Increment to either the current room

temperature or to the current target temperature, whichever is higher.

•

In the unlikely event that the Room Sensor loses knowledge of the correct date and

time, then the heating will continue to operate however it is likely to be out of step

with the actual current day and time. This will continue until such a time as the date

and time information can be downloaded from the OWL servers again. This could oc-

cur if the Network OWL is not connected to the Internet after the batteries have been

replaced. If this occurs, use the Comfort and Standby buttons to manually bring the

heating on / off until the Internet connection is restored to the Network OWL.

•

If the Room Sensor batteries are allowed to get too low, then the heating will no

longer be able to switch on. This could be a risk for elderly and infirm householders.

Please ensure batteries are replaced as soon as possible after the warning messages

are given.

•

In order to ensure long battery life, the Room Sensor only communicates over the

radio link to the Network OWL once every time period as shown in the table below.

This means that it can take a while for web dashboard or smart phone instigated com-

mands, such as clicking on the Comfort icon, to take effect. This is normal operation.

Button presses on the actual Room Sensor will respond immediately.

After the initial potentially slow response, the Room Sensor will remain "ready for ac-

tion" for the following 2 minutes. Web dashboard commands during this period should

take effect within 10 seconds.

Room Sensor Radio Update Rate

Mode

Comfort Period

Standby

Away / Holiday / Summer

Update Rate

Units

Seconds

303

Seconds