DRI Sleeper excel 사용 및 관리 지침 - 페이지 3

{카테고리_이름} DRI Sleeper excel에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DRI Sleeper excel 5 페이지. Bedwetting alarm with smartfabric urosensor

How to use:

1. Attach the two domed ends of the snap connector lead to the domes

on the bed mat (there is no particular order- either dome on the snap

connector lead can be attached to either dome on the bed mat).

2. Plug the snap connector lead into the DR Sleeper® excel alarm box.

3. Test the alarm by placing something metal (stainless steel knife or a

pair of stainless steel scissors) across two or more of the silver

sensing threads sewn onto the bed mat. The alarm will trigger.

4. Unplug the lead from the alarm to disconnect the alarm after testing.

5. Lay the bed mat under the bottom sheet of the bed to be positioned

under the child's body to catch the urine when the child wets.

6. Take the lead out to the side of the bed and plug into the alarm. Clip

the alarm onto the bedding away from the wetting area.

7. The alarm is ready to use.

NOTE: When the alarm is not in use during the day make sure the lead is

unplugged from the alarm to conserve battery power.

8. When the alarm triggers make sure your child gets out of bed

promptly, unplugs the lead from the alarm to disconnect it and goes

to the bathroom.

9. The Smartfabric Urosensor and bedsheet will need to be removed

and washed and dried before re-use.

NOTE: Unplug snap connector lead from bed mat before washing.

Trouble shooting

If the Smartfabric Urosensor does not trigger the alarm when tested prior to

use this means either:

1. The batteries in the alarm need replacing.

To replace the batteries:



Remove the back of the alarm by separating the two raised areas on the

side of the alarm. This is easy to do by putting any rigid item between

them and twisting gently.



Take care not to touch the internal circuitry.



Insert 4 new LR44 button batteries in the direction indicated by the

diagram inside the alarm.