Atlantic Signal Dominator II 운영자 매뉴얼

{카테고리_이름} Atlantic Signal Dominator II에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Signal Dominator II 2 페이지.

THE DOMINATOR II COMMS SUITE

The DOMINATOR II was developed with a U.S. Naval Special Warfare team in an effort to overcome issues they were having with other

communication systems on the market. Prior to the DOMINATOR project, most of the comms systems available forced the operator

to have something in, on or over one or both ears to communicate. Many of the systems required earpieces to be worn in both ears to

both RX and TX. Furthermore, most of those same systems required the use of batteries inside the push-to-talk coupled with software

DOMINATOR II

that required periodic updating via connection to a PC. Other systems required ear cups to be positioned and worn over both ears for

radio RX. Our client complained about issues with these various designs including ear fatigue, sweat filling the ear canals, less than

OPERATOR'S MANUAL

clear transmitted comms by systems using an in-the-ear microphone for TX and dissatisfaction with the quality of amplified ambient

environment (situational and directional awareness) as compared to SA and DA from natural hearing. The DOMINATOR development

project began in May of 2009 and satisfactory completion was not realized until December of 2012 - a project that required nearly 3.5

years of development, design/re-design and test and evaluation in both the U.S. and in theatre.

The DOMINATOR II combines a waterproof/noise canceling boom microphone for TX while utilizing both bone conductors and

electronic earpieces for radio RX. The bone conductors and electronic earpieces work independently of one another as well as in

concert when operational requirements call for the implementation of hearing protection. The electronic earpieces are capable of

performing three functions: a. Radio/ICS/Smartphone/MP3 Reception b. Electronic Hearing Protection c. User Controlled Ambient

Environment Amplification. When hearing protection is not required, the earpieces can be removed from the ears and stowed out of the

way via a magnet assembly on each earpiece cable. Radio RX is maintained without the use of the electronic earpieces via twin bone

conductors integrated into the headset. Radio transmissions are received via the facial bones directly in front of each ear and passed

via bone conduction to each inner ear canal. The DOMINATOR II is available in both single and dual comm radio models and features

a broad mix of mission-specific accessory cables as well as connectors for the most fielded military radio platforms. A wireless, gun

mount remote push-to-talk control is also available.

The DOMINATOR II met the requirements of the U.S. NSW client, including a simple to use plug and play design, the ability to engage

and disengage hearing protection at will, little or no maintenance, no main push-to-talk batteries or software upgrades as well as not

having something in, on or over the ears at all times to maintain RX and TX capabilities. A team-wide purchase was made in early

2013.

PROPERLY FITTING THE

DOMINATOR II HEADSET TO YOUR HEAD

Undo the adjustable rear Velcro strap and position the stainless steel DOM II frame over the top of your head. Grab ahold and

position the two individual sidepiece housings (containing the bone conductors and earpieces) of the headset directly in front

of each ear. Release the sidepiece housings, if your headset frame is the proper size (S-XL) the sidepiece housings should

remain in place directly in front of your ears lying across the cheek bones (think of each sidepiece as a 'sideburn'). If the

sidepiece housings slide downward after you release them and are no longer positioned on the cheek bone, in front of the ears,

your frame length is too long. Likewise, if you position the headset on your head and the sidepiece housings orient themselves

above the cheek bones when released - your frame length is too short. As mentioned earlier, the DOM II is available in 4 frame

lengths (S-XL) - it is crucial that you have the proper size frame in order to take full advantage of the unique capabilities of bone

conduction reception. Look closely on the inside portion of the headset that lies against your face -- you will see a laser etched

letter (S-XL) that will denote the size of headset you have.

The DOMINATOR II nylon head strap separates for adjustment. One end of each strap features a steel snap designed to

encircle and lock down on the stainless steel frame of the headset. One of the opposite strap ends features sewn hook Velcro

while the other strap features its sewn loop counterpart. When attached together, the strap provides a stabilizing effect for

the headset to prevent unwanted rearward or forward movement. When properly adjusted, the sidepiece housings of the

DOM II should be directly in front of each ear and directly across each cheek bone. There should be little forward or rearward

movement of the headset once the rear head strap is adjusted properly

DOM II BOOM MIC

The DOMINATOR II headset features a waterproof, noise-

canceling boom microphone as the method of voice transmission.

The microphone arm is manufactured from flexible brass covered

in a durable neoprene jacket allowing the operator to position the

microphone element, at the end of the boom arm, at the most

advantageous degree for voice transmission. The DOM II boom

microphone features twin elements, one that points away from

the mouth and face when properly positioned and the other that

points directly toward the mouth and face. When a push-to-talk

button is depressed on the control box, the microphone element

pointing away from the mouth/face, picks up the noise in the

operator's ambient environment and cancels it out - preventing

it from being transmitted to other operators on the same radio

frequency. This allows the voice transmission being picked up by

the element facing the mouth and face to be clear and concise

when transmitted to others. Many systems on the market utilize

an in-the-ear bone microphone for picking up the operator's

voice and transmitting it to others. Our client believed in-the-ear

transmissions to sometimes be garbled, impacted by sweat in the

ear canal and generally less than reliable - particularly in high

noise environments such as helos. Furthermore, the operators did

not want to have something positioned in the ear(s) the entire time

to maintain radio, phone and ICS comms. A high-quality, noise

canceling boom microphone overcomes those obstacles - thus

one of the main reasons it was utilized in the DOM II's design.

DOMINATOR II ADJUSTABLE MAGNET PLATFORM

CHOOSING DOMINATOR II

Each DOM II electronic earpiece features a framed magnet on the earpiece cable. The magnet frame is held onto the earpiece cable via

EARTIP SIZES & STYLES

two small screws. Sandwiched between the two magnet holder halves is a sleeve of neoprene. The magnet frame is designed to allow

an operator to loosen the two screws, providing the ability to slide the magnet frame up and down on the earpiece cable for personal

You likely already have experience with some form of earplug

positioning for comfort. The neoprene sleeve should be moved into position with the two magnet holder halves. Once the proper magnet

or earpiece and the DOMINATOR II is no different. You want

position is determined, retighten each screw, encircling and capturing the neoprene sleeve. Due to overall ear size/shape differences,

the foam or silicone ear tips to fit comfortably in the ear canal

you may find that the magnet's positioning, when initially provided to you, is not optimum -- the magnet may lay against your lobe

yet tight enough to seal the ear canal opening to prevent access

and cause discomfort over time. The release and repositioning ability of the magnet holder design remedies this potential issue. It is

to dangerous sounds. The DOM II features your choice of foam

recommended you utilize the thumb, index and middle finger when grasping the earpiece to insert or disengage from the ear. Please

and silicone ear tips in three different sizes. In terms of noise

note; each earpiece features a monofilament line over the center of the ambient microphone windscreen - this was designed to help

protection, when the proper size is worn and properly fitted, the

take tension/pressure off the windscreen when grasped. When removing the earpieces from the ears you will find, with little repetition,

foam models provide 28 NRR (Noise Reduction Rating) while the

the ease with which you can locate the magnet and steel sidepiece housing - capturing and holding the earpieces out of the way when

silicone provide 23 NRR. We do not recommend one style over the

not in use.

other -- it is an issue of personal choice for both fit and comfort.

Both styles of ear tips are field replaceable and should certainly be

periodically changed to assure proper function and performance.

DOM II BONE

DOM II ELECTRONIC EARPIECES FOR RX /

CONDUCTORS FOR RX

HEARING PRO / ENVIRO AMPLIFICATION

One of the founding members of Atlantic Signal invented the

The DOM II also features electronic earpieces terminated to each sidepiece housing of the headset. The DOM II earpieces

world's first tactical bone conduction headset back in 1989

serve three primary functions: a) radio, smart phone, MP3 and ICS communication reception b) electronic dynamic hearing

and the same bone conductor, with minor variations through

protection and c) ambient environmental amplification. Each earpiece, when not worn in the ear canals, is easily stored, via

the years, is still manufactured today and is part of the best-

a magnet assembly, on each earpiece cable that, when positioned near each headset sidepiece, makes magnetic contact

selling line of tactical bone conduction headsets in the world.

with each headset sidepiece's steel faceplate surface. This method of storage keeps each earpiece out of the operator's

The DOM II features a vertical, steel frame (available in sizes

way when not worn yet provides ease of access when the earpieces are needed to meet an operational RQT. The hearing

S-XL) with sidepiece housings on each end that contain, among

pro element of the DOM II includes the operator's choice from 3 sizes each of both foam and silicone earpieces in sizes S/M

other components, a bone conductor. When properly positioned,

& L. The earpieces remain stable in the ear via the patented concha bows on each earpiece yet are easily removed by the

the bone conductor picks up incoming radio transmissions on

operator when the earpieces are not required. Furthermore, the DOM II earpieces were not designed to position deeply in the

the cheek bone, directly in front of the ears, and transmits them

ear canals like many other systems, rather are positioned comfortably just inside the canal providing a tested and confirmed

directly to the inner ear canal. This unique method of voice

28 NRR (Noise Reduction Rating) in foam and 23 NRR with the silicone alternative. The DOM II features noise-dependent

reception allows an operator to leave his ears unobstructed

dynamic hearing protection. This means in a quiet environment the ambient amplification feature does not over-amplify the

to hear non-radio voice commands as well maintain natural

environment - rather it provides normal hearing reproduction and allows the operator to adjust the amplification upward or

situational and directional awareness. The bone conductors are

downward from the body worn control box. In loud environments, the earpieces provide automatic attenuation of dangerous

used for incoming radio communication reception only - we do

noise levels, providing protection against both constant and fluctuating noise. Furthermore, the earpieces provide protection

not utilize bone conductors as transmit devices as positioning is

against impulse noises. The binaural microphone monitoring the operator's environment provides excellent localization as

crucial in order to pick up the voice well enough for TX. Years of

well.

experimentation have proven that vigorous operational activities

do not allow for assured/constant proper positioning - thus the

DOM II utilizes bone conductors for RX only. As a receive device

in the DOMINATOR II, the bone conductors are utilized for

incoming radio communications only -- they are NOT used for

incoming MP3, smartphone or ICS reception.

DOMINATOR II BONE CONDUCTION

As shown in the pictures and previously described, the bone conductors should be positioned directly in front of each ear

for proper radio RX. With the earpieces positioned properly - the attached, black concha bow should be bent forward as the

earpiece is inserted into the ear canal. The patented concha bow acts as a stabilizer, holding the earpiece firmly in the proper

position to ensure clear and consistent reception of incoming comms as well as maintaining a proper seal to protect the user's

hearing. As a reminder, the bone conductors ONLY receive incoming radio comms. The electronic earpieces receive radio

comms PLUS smartphone, MP3 and ICS comms - also providing ambient amplification and level dependent electronic hearing

protection.

AND EARPIECE RX