DRI BEAST SIM-75 소유자 매뉴얼 - 페이지 7

{카테고리_이름} DRI BEAST SIM-75에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DRI BEAST SIM-75 13 페이지. Lgr dehumidifier

Storage/ After Each Use

Wipe the enclosure, control panel, and cord with a damp cloth or sponge.

The outlet grid should simply be dusted. It should not be immersed in water.

Use pump Drain button to empty water.

Walk out the hose to drain it completely.

Remove the inlet filter and using gas to blow off the dust on the surface. Do not

rinse or wash the filter. Make sure the filter is completely dry before reinstalling.

Take out the filter

1. Screw out two nuts from front housing, and take off inlet

grid to get the filter. (Figure 3)

2. Clean the filter with a vacuum cleaner.

3. Place the filer back in the unit.

Cleaning The Filter

Filter should be cleaned once for a month and replace the filter after using for 12 months.

Only need to blow off the dust to cleaning the filter.

To extend the life of the filter when the unit is not sued for a long time, put the filter in a

plastic sealable bag.

ERROR MESSAGES REQUIRING SERVICE

The following table lists possible error codes that may appear in the HUMIDITY% display

if the unit detects a problem. In this event, the unit may need service.

Malfunction display

-6-

Screw out two nuts

Problem

Humidity sensor may need service

Pump may need service

Defrost sensor may need service

Dri Beast - LGR dehumidifier

Figure 3