Atlantic Technology 254.1 SR 사용 설명서 - 페이지 4

{카테고리_이름} Atlantic Technology 254.1 SR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Technology 254.1 SR 8 페이지. System 250.1 high performance loudspeaker system

페이지 인쇄

Models 251.1 LR, 253.1 C, and 254.1 SR

Placement

The design of the System 250.1 provides you with maximum flexibility when creating a

large, seamless, acoustically accurate soundfield for your home theater or music system.

The best placement of the various components will vary from system to system. Use the

following placement guidelines and Figure 3 as a starting point. Feel free to experiment.

Home Theater

For a home theater system, place your Model 251.1 LR speakers on either side of the

television. All of the System 250.1 speakers (except the Model 262 PBM Powered Bass

Module) are magnetically shielded so that they will not interfere with your television

picture. The left front and right front speakers should be far enough apart that you get a

good stereo image, but not so far apart that the sound seems to come directly from the

speakers, distracting you from the picture. If you are using a center channel speaker, a

wider separation of the left and right front speakers is usually possible.

Figure 3:

Typical arrange-

ment for speakers

in a home theater.

For best results,

place the surround

speakers within the

shaded areas.

loudspeakers. Due to their spatial characteristics, it is possible to place the speakers

virtually anywhere, but usually the best location is nearly straight out to the sides of the

primary listening area, either at ear level or 1-2 feet above.

Note: The orientation of the 254.1 is important to the proper generation of the surround

soundfield. Mount each speaker on the wall or shelf so that the "direct" soundfield is directed

toward the front of the room, and the "ambient" soundfield is directed toward the rear.

There is an arrow on the back of each speaker to guide you.

tlantic

TECHNOLOGY

The Model 253.1 C

should be placed

directly on or under

your television. Place

the speaker base so

that the foot cutouts

are facing forward.

Then, pivot the

speaker on its base

and tilt the speaker so

that it points directly

at the listener.

The 254.1 SR's size and

shape allows greater

flexibility in place-

ment than most

conventional surround