Atlantic Technology IW-115SR 사용 설명서 - 페이지 9

{카테고리_이름} Atlantic Technology IW-115SR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Technology IW-115SR 12 페이지. In-wall high performance surround speaker

페이지 인쇄

Instruction Manual

Installing the Speaker Assembly

Insert the speaker into the cutout and using a level carefully align it so it is level. Tighten

the mounting screws, which will cause the attached clamps to rotate and position them-

selves properly behind the wall.

Continue to tighten until the speaker is snug in the wall. You want the bezel to conform to

the wallboard, and the frame not to rattle from the speaker' s vibration, but be very care-

ful not to overtighten the screws.

It is strongly recommended that you hand-tighten the mounting screws the final few

turns (after using an electric screwdriver set to "low torque") to avoid the possibility of

damaging the frame.

Speaker Setup

Dipole/Bipole Operation of IW-115SR

DIPOLE

BIPOLE

tional audio in Dolby Atmos and other object-based systems are engineered to create a

more precisely-localizable surround effect. Therefore we believe speakers set to BIPOLE

will typically outperform dipole speakers in an object based system.

DIPOLE

BIPOLE

When using the IW-115SR in a Dolby Pro Logic®, Dolby Digital

5.1, 7.1 or 9.1, Dolby True HD or DTS Master Audio-based home

theater, we recommend setting the switch to DIPOLE.

When using the IW-115SR in a Dolby Atmos or DTS-X® home

theater, we recommend setting the switch to BIPOLE. The posi-

Installing the Speaker

The clamping mechanism allows

the wall material to range from

½" to 1½" (12 to 38 mm) in

thickness. There must be a min-

imum depth behind the wall

face of 3

⁄

" (92 mm). As noted

above, be sure to keep the top

and bottom of the cutout at least

1½" (38mm) away from obstruc-

tions, as the rotating clamps will

not operate properly if you don't.