Electrolux HOOV11E 설치 매뉴얼 - 페이지 32

{카테고리_이름} Electrolux HOOV11E에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux HOOV11E 32 페이지. Built-in hood for electric oven
Electrolux HOOV11E에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

페이지 인쇄

AL03 IM_HO_L4

Plug the newly disconnected pipe using a clamp or

screw (check that the other end of the pipe is still

connected to the steel pipe welded in place 3)

Use the new supply blue pipe to connect the solenoid

valve (black sticker, first one near the threaded inlet)

to position 4 of the vapour exhaust pipe. Cut it to the

correct and "comfortable" length. Use the new screw

clamp to lock the hose in place.

Change Software parameters following documents:

"AL01 IM_HO_01_02_03_04" for Touch Oven

"AL02 IM_HO_01_02_03_04" for Digit Oven

Electrolux Skyline

Oven 06-10grids – Hood Level 4

Quenching modification procedure

Remove the screw in the inlet (position 4) of the

vapour exhaust pipe

Insert the new metal component supply from above

into the vapour exhaust pipe (pay attention to the

position of the side hole, at the bottom, as shown in

the picture below, axial orientation is irrelevant).

Rel.

210220

pag. 2